DY 120-50 Multistage High Pressure Pumps 110~600 m Head 2950 r/min
Category:
Multistage High Pressure Pumps
Price:
USD 1000 Unit
Specifications
Material:
Cast Iron 、stainless Steel、etc
Color:
Orange Or Required
Port:
Tianjin、 Beijing
Head:
110~600 M
Flow:
96~120 M3/h
Speed:
2950 R/min
High Light:
multistage centrifugal pump
,high pressure multistage centrifugal pumps
Introduction
DY 120-50 Multistage High Pressure Pumps 110~600 m Head 2950 r/min
Description
- D, DF, DY type horizontal multi-stage centrifugal pump horizontal single-suction multi-stage segmental vertical centrifugal pump.
- Type D is used for conveying liquid without solid particles, the temperature is below 80 ℃ water or similar physical and chemical property of Yu Qingshui liquid.Suitable for mines, factories and urban water supply and drainage engineering.
- Type DF is used for conveying liquid without solid particles, the temperature is -20 ℃ ~ 105 ℃ corrosive liquid.Users according to the name of the medium, concentration, proportion, temperature and reasonable choose the material of pump, such as the pump inlet pressure seal form, the structure of the pump and determine the motor capacity, etc.
- Type DY is used for conveying liquid without solid particles, temperature is -20 ℃ ~ 105 ℃, the viscosity - less than 120 centipoise oil and oil products.
Features
- advanced hydraulic model, high efficiency, wide range of performance.
- pump running smoothly, low noise.
- seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.
- the shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.
Model Significance
Such as D600-60 x 6, DF600-60×6, DY600-60×6
D - multistage centrifugal water pump
DF - corrosion resistance multistage centrifugal pump
DY - multistage centrifugal pump
600 - the design flow rate is 600 m³/h
60 - design point single-stage head is 60 m
6 - series for level 6
Performance
D(DF/DY)120-50 Performance Parameter
| Level | Flow Q | Head | Speed | η | shaft power | Motor | Impeller | Pump | Moter | |||
| H | n | (%) | N | NPSHr | Diameter | weight | weight | |||||
| (m) | (r/min) | (kw) | (m) | D | (kg) | (kg) | ||||||
| m³/h | L/s | power(kw) | Type | (mm) | ||||||||
| 2 | 110 | 2950 | 39.44 | 55 | Y250M-2 | 213 | 312 | 395 | ||||
| 100 | 44.54 | |||||||||||
| 84.6 | 48.8 | |||||||||||
| 3 | 165 | 59.09 | 90 | Y280M-2 | 377 | 550 | ||||||
| 150 | 66.88 | |||||||||||
| 126.9 | 71.68 | |||||||||||
| 4 | 222 | 78.79 | 110 | Y315S-2 | 442 | 875 | ||||||
| 200 | 89.17 | |||||||||||
| 169.2 | 95.57 | |||||||||||
| 5 | 275 | 98.49 | 132 | Y315M-2 | 507 | 950 | ||||||
| 250 | 111.46 | |||||||||||
| 211.5 | 119.46 | |||||||||||
| 6 | 330 | 118.18 | 160 | Y315L1-2 | 572 | 1070 | ||||||
| 96 | 300 | 73 | 133.75 | 3.2 | ||||||||
| 253.8 | 143.36 | |||||||||||
| 7 | 385 | 137.88 | 200 | Y315L2-2 | 637 | 1190 | ||||||
| 120 | 350 | 73.3 | 156.04 | 5.1 | ||||||||
| 296.1 | 167.25 | |||||||||||
| 8 | 440 | 157.58 | 200 | Y315L2-2 | 702 | 1190 | ||||||
| 120 | 400 | 67.5 | 178.33 | 6.7 | ||||||||
| 338.4 | 191.14 | |||||||||||
| 9 | 495 | 177.28 | 220 | Y355M1-2 | 767 | 1350 | ||||||
| 450 | 200.63 | |||||||||||
| 380.7 | 215.03 | |||||||||||
| 10 | 550 | 196.97 | 280 | Y355L1-2 | 832 | 1550 | ||||||
| 500 | 222.92 | |||||||||||
| 423 | 238.93 | |||||||||||
| 11 | 605 | 216.67 | 280 | Y355L1-2 | 897 | 1550 | ||||||
| 550 | 245.21 | |||||||||||
| 465.3 | 262.82 | |||||||||||
| 12 | 660 | 236.37 | 315 | Y355L2-2 | 962 | 1650 | ||||||
| 600 | 267.59 | |||||||||||
| 507.6 | 287.71 |
Send RFQ
Stock:
MOQ:
1 unit